Things to know before admitting your kids to school

-
Here are few things that you must know or take care of before admitting your kids to school. If you are not taking care of these things, you might be putting you children to wrong school, risking life. Only irresponsible parents do this mistake who all do not love their children or one who are not serious about their children or one who are uneducated. So, let me guide you to few thins that you need to take care of before admitting your children to school. 1. See if school is registered to local registerer (respective government). 2. Check the classroom, bathroom, playground, kitchen, it needs to be clean. 3. Sit in the classroom for 5 to 10 min., see how they lecture children. 4. Check the school fee, other fee, transportation fee, see if you can afford. 5. Check the food they fed to children, how many times, they give food to children. 6. Check the school duration, start and end time, usually for children 4 to 8 hours, see for how long your student can sit in class. 7. Ask for holida...

How to create a bootable USB flash drive

-

1. Insert your USB flash drive in to your computer.

2. Open the Command Prompt as an administrator.

3. Type diskpart on Command Prompt, press Enter Key and wait for few seconds.

4. Type list disk and press Enter.
Note: You will see list of hard disk and flash drive connected to your computer, you need to select flash drive from list, and best way to recognize flash drive is to check the capacity of disk shown in list, one that match your flash drive capacity, select that one.

5. Type select disk 1 (Make sure your disk 1 is flash drive) and press Enter.

6. Type clean and press Enter to wipe out everything.

7. Type create partition primary and press Enter.

8. Type select partition 1 and press Enter.

9. Type format fs=ntfs quick and press Enter.

Note: If your server platform supports Unified Extensible Firmware Interface (UEFI), you should format the USB flash drive as FAT32 rather than as NTFS. To format the partition as FAT32, Type format fs=fat32 quick, and then press ENTER.

10. Type active and press Enter.

11. Type exit and press Enter.

Note: do not close the command prompt, follow few more steps bellow.

12. Let's say
My Flash drive or USB Drive is drive G:
My DVD RW drive is drive D:
Note: You can check of your own flash drive and DVD RW drive letter in your own computer.

13. Type D: (your DVD RW drive letter) and press Enter.

14. Type cd boot and press Enter.

15. You will see command prompt as your DVD RW drive letter\boot>
For e.g. D:\boot>

16. Type bootsect /nt60 G: and press Enter.
Note: G: (put your computer USB flash drive letter).
Type 'exit' and press Enter to close the Command Prompt.

17. Copy and paste the operating system files to USB flash drive

Popular posts from this blog

Top international payment gateway transaction fee comparison (2024)

-
There are lots of top international Payment gateway over the internet to get paid online. You must be confused which payment gateway to choose for receiving money from different market places and transfer to your own local bank account. Which payment gateway charge low fee for receiving money and low charge for transferring to local bank account. Bellow is the comparison in between Payoneer, Skrill and PayPal. Payment gateway Name Account & Card maintenance - charge Transfer in between same wallet - charge Transfer from wallet to local bank account - charge Receive from market place to wallet - charge 1.       Payoneer Annual account fee = 29.95 USD (If you have received less than 2,000.00 USD (or equivalent) in payments per Year)   Annual card fee: First card = 29.95 USD   Additional cards in any currency = Free FREE EUR, USD, GBP, and m...
Read more

How to Manage Boot Configuration of Windows using CMD

-
Image
In CMD (Command Prompt), the "bootcfg" command is used to manage the boot configuration data (BCD) for Windows operating systems. This command is used primarily to configure the boot.ini file for older versions of Windows, as newer versions use the BCD store. The syntax for the "bootcfg" command is: bootcfg [options] The " options " argument is optional and can be used to modify the behavior of the command. For example, the " /add " option can be used to add a new operating system entry to the boot configuration data. For example, if you want to reconfigure boot.ini file to remove any defects, you may use the following command: bootcfg /rebuild The command will scan all drives for any Windows installations, display the results, and step you through building the boot.ini file. Note that the " bootcfg " command is not available in newer versions of Windows, which use the BCD store instead of the boot.ini file. In these version...
Read more

What is Python Syntax and how to use?

-
Python syntax refers to the set of rules and structure that defines how a Python program is written and interpreted. Understanding Python syntax is essential to writing code that the Python interpreter can execute. Below is an overview of Python syntax and how to use it: ### 1. **Basic Syntax**    - **Case Sensitivity**: Python is case-sensitive, so `Variable` and `variable` are considered different.    - **Indentation**: Indentation is used to define blocks of code. Python uses indentation (usually four spaces or a tab) to indicate a block of code, such as in loops, conditionals, and function definitions. For example:      ```python      if condition:          # Indented block          print("Condition is true")      ```    - **Comments**: Comments are lines that Python ignores, used for annotations. ...
Read more